| |
| [ Enquiries ] |
| |
Your Precision Pure PWS 8-5 is the most advanced water
distillers on the market today. It is designed with many user-friendly features:
Your water distiller is connected to your household water supply. The raw water feeds into the distiller through a 1/4” water line (1). This line is connected to a quick connect plumbing fitting. As the raw water enters the distiller it passes through a long life stainless steel sealed solenoid and then directly into the boiler chamber (2).
After the water reaches a level over the heating element (3), the distiller starts the heating cycle and brings the water to boil. The pure steam (4) rises and enters the baffle system (5), which breaks down any foaming in the boiler should it occur.
Any volatile gases are released through a special gas release vent at the highest point in the cooler system (6). The pure steam passes through the condenser coil (7). To support the cooling cycle a fan is used to properly cool the steam (8).
Pure water enters the stainless steel charcoal filter (9). This filter is 2/3 filled with activated coconut charcoal, which should be changed every 3 months.
Finally distilled water leaves the charcoal filter and runs into the high capacity stainless steel storage tank (10).
As the distilled water enters the storage tank, the water level lifts the pump control switch and activates the optional pump (11) to deliver distilled water to any combination of accessory faucet, ice maker or humidifier.
The distiller will continue to run until the water reaches the top of the storage tank and lifts the upper float (12) and turns itself off. As soon the distiller shuts off, the automatic electric drain valve system (15) if equipped, automatically drains the impuities. As soon as you have used approximately 1/3 of the capacity of the tank the stainless steel stem float (13) will turn on the distiller and close the automatic drain valve (15). In order to fill the boiling tank and start the distilling cycle again.
The demand pump system (11), if equipped, connects to the bottom of the storage tank and electrically plugs into the bottom of the distiller head (16). The pump is protected by a built in fuse and a low level shut off float (14).
| [ Enquiries ] |
